SFP+ port LED
The HPE 5130 48G 2SFP+ 2XGT EI, HPE 5130 48G PoE+ 2SFP+ 2XGT (370W) EI, HPE 5130 24G SFP 4SFP+ EI, HPE 5130 48G 4SFP+ EI, HPE 5130 48G 4SFP+ EI BR, HPE 5130 48G PoE+ 4SFP+ (370W) EI, and HPE 5130 48G PoE+ 4SFP+ (370W) EI BR switches provide a double-color (green and yellow) LED for each SFP+ port to indicate its operating status.
Table 28: SFP+ port double-color LED description
Status
Description
Steady green
A transceiver module is installed in the port. The port is operating at 10 Gbps and a link is present on the port.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A transceiver module is installed in the port. The port is operating at 1 Gbps and a link is present on the port.
Flashing yellow (not 3 Hz)
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz)
The port has failed POST.
Off
No transceiver module is installed in the port, or no link is present on the port.
The port mode LED is operating in PoE mode (applicable to the PoE switch models.)
The HPE 5130 24G 2SFP+ 2XGT EI, HPE FlexNetwork 5130 24G PoE+ 2SFP+ 2XGT (370W) EI, HPE 5130 24G 4SFP+ EI, HPE 5130 24G 4SFP+ EI BR, HPE 5130 24G PoE+ 4SFP+ (370W) EI, and HPE 5130 24G PoE+ 4SFP+ (370W) EI BR switches provide two single-color LEDs for each SFP+ port to indicate its operating status.
Table 29: Description for the two single-color LEDs for the SFP+ port
LED
Status
Description
Green LED
Steady on
A transceiver module is installed in the port. The port is operating at 10 Gbps, and a link is present on the port.
Flashing
The port is sending or receiving data at 10 Gbps.
Off
No transceiver module is installed in the port, or no 10 Gbps link is present on the port.
The port mode LED is operating in PoE mode (applicable to the PoE switch models.)
Yellow LED
Steady on
A transceiver module is installed in the port. The port is operating at 1 Gbps, and a link is present on the port.
Flashing (not 3 Hz)
The port is sending or receiving data at 1 Gbps.
Flashing (3 Hz)
The port has failed POST.
Off
No transceiver module is installed in the port, or no 1 Gbps link is present on the port.
The port mode LED is operating in PoE mode (applicable to the PoE switch models.)