1/10GBase-T autosensing Ethernet port LEDs
The HPE 5130 48G 2SFP+ 2XGT EI and HPE 5130 48G PoE+ 2SFP+ 2XGT (370W) EI switches provide a double-color (green and yellow) LED for each 1/10GBase-T autosensing Ethernet port to indicate its operating status.
Table 25: 1/10GBase-T autosensing Ethernet port double-color LED description
Status
Description
Steady green
The port is operating at 10 Gbps and a link is present on the port.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
The port is operating at 1 Gbps and a link is present on the port.
Flashing yellow (not 3 Hz)
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz)
The port has failed POST.
Off
No link is present on the port.
The port mode LED is operating in PoE mode (applicable to the PoE switch models.)
The HPE 5130 24G 2SFP+ 2XGT EI and HPE 5130 24G PoE+ 2SFP+ 2XGT (370W) EI switches provide two single-color LEDs for each 1/10GBase-T autosensing Ethernet port to indicate its operating status.
Table 26: Description for the two single-color LEDs for the 1/10GBase-T autosensing Ethernet port
LED
Status
Description
Green LED
Steady on
The port is operating at 10 Gbps and a link is present on the port.
Flashing
The port is sending or receiving data at 10 Gbps.
Off
No 10 Gbps link is present on the port.
The port mode LED is operating in PoE mode (applicable to the PoE switch models.)
Yellow LED
Steady on
The port is operating at 1 Gbps and a link is present on the port.
Flashing (not 3 Hz)
The port is sending or receiving data at 1 Gbps.
Flashing (3 Hz)
The port has failed POST.
Off
No 1 Gbps link is present on the port.
The port mode LED is operating in PoE mode (applicable to the PoE switch models.)