display ipv6 routing-table protocol

Syntax

display ipv6 routing-table protocol protocol [ inactive | verbose ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

protocol: Displays routes of a routing protocol, which can be direct and static.

inactive: Displays only inactive routes. Without the keyword, all active and inactive routes are displayed.

verbose: Displays both active and inactive verbose routing information. Without this keyword, only brief active routing information is displayed.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see the Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.

Description

Use the display ipv6 routing-table protocol command to display routes of a specified routing protocol.

Examples

# Display brief information about all direct routes.

<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1

Direct Routing Table's Status : < Active >
Summary Count : 1

Destination: ::1/128                                     Protocol  : Direct
NextHop    : ::1                                         Preference: 0
Interface  : InLoop0                                     Cost      : 0

Direct Routing Table's Status : < Inactive >
Summary Count : 0   

See Table 2 for description of the output.