Configuration procedure
Follow these steps to configure the DHCPv6 client:
To do… | Use the command… | Remarks |
|---|---|---|
Enter system view | system-view | — |
Enable the IPv6 packet forwarding function | ipv6 | Required |
Enter interface view | interface interface-type interface-number | — |
Enable IPv6 stateless address autoconfiguration | ipv6 address auto | Required |
![[NOTE: ]](images/note.png) | NOTE: For more information about the ipv6 address auto command, see the chapter "IPv6 basics configuration commands." Hewlett Packard Enterprise recommends that you not enable the DHCPv6 client and DHCPv6 server, or the DHCPv6 client and DHCPv6 relay agent on the same interface at the same time. | |