tunnel bandwidth

Syntax

tunnel bandwidth bandwidth-value

undo tunnel bandwidth

View

Tunnel interface view

Default level

2: System level

Parameters

bandwidth-value: Specifies the bandwidth value of the tunnel interface in kbps, in the range of 1 to 10000000.

Description

Use tunnel bandwidth to set the bandwidth of the tunnel interface.

Use undo tunnel bandwidth to restore the default.

By default, the bandwidth of the tunnel interface is 64 kbps.

The tunnel interface bandwidth set with the tunnel bandwidth command is for dynamical routing protocols to calculate the cost of a tunnel path, rather than changes the bandwidth of the tunnel interface. Refer to the bandwidth of the output interface of the packet when you set the bandwidth of the tunnel interface.

Examples

# Configure the bandwidth of Tunnel 0 as 100 kbps.

<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] tunnel bandwidth 100