ipv6 dhcp snooping option remote-id enable

Syntax

ipv6 dhcp snooping option remote-id enable

undo ipv6 dhcp snooping option remote-id enable

View

Layer 2 Ethernet port view, Layer 2 aggregate interface view

Default level

2: System level

Parameters

None

Description

Use ipv6 dhcp snooping option remote-id enable to enable DHCPv6 snooping support for Option 37.

Use undo ipv6 dhcp snooping option remote-id enable to restore the default.

By default, DHCPv6 snooping support for Option 37 is disabled.

The ipv6 dhcp snooping option remote-id enable command is effective only when you enable DHCPv6 snooping globally in system view, and enable DHCPv6 snooping in VLAN view.

Examples

# Enable DHCPv6 snooping support for Option 37.

<Sysname> system-view
[Sysname] ipv6 dhcp snooping enable
[Sysname] vlan 1
[Sysname-vlan1] ipv6 dhcp snooping vlan enable
[Sysname-vlan1] quit
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] ipv6 dhcp snooping option remote-id enable