ipv6 dhcp snooping max-learning-num
Syntax
ipv6 dhcp snooping max-learning-num number
undo ipv6 dhcp snooping max-learning-num
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
number: Maximum number of DHCPv6 snooping entries an interface can learn.
On the HPE FlexNetwork 3600 v2 EI switch series, the number argument ranges from 0 to 4096.
On the HPE FlexNetwork 3600 v2 SI switch series, the number argument ranges from 0 to 1024.
Description
Use ipv6 dhcp snooping max-learning-num to configure the maximum number of DHCPv6 snooping entries an interface can learn.
Use undo ipv6 dhcp snooping max-learning-num to restore the default.
By default, the number of DHCPv6 snooping entries learned by an interface is not limited.
Examples
# Set the maximum number of DHCPv6 snooping entries Layer 2 Ethernet port Ethernet 1/0/1 can learn to 1000.
<Sysname> system-view [Sysname] interface Ethernet 1/0/1 [Sysname-Ethernet1/0/1] ipv6 dhcp snooping max-learning-num 1000