ipv6 dhcp pool

Syntax

ipv6 dhcp pool pool-number

undo ipv6 dhcp pool pool-number

View

System view

Default level

2: System level

Parameters

pool-number: Specifies an address pool number.

Description

Use ipv6 dhcp pool to create a DHCPv6 address pool and enter DHCPv6 address pool view, or enter DHCPv6 address pool view if the specified address pool already exists.

Use undo ipv6 dhcp pool to remove the address pool.

No DHCPv6 address pool is configured by default.

Examples

# Create DHCPv6 address pool 1 and enter its view.

<Sysname> system-view
[Sysname] ipv6 dhcp pool 1
[Sysname-dhcp6-pool-1]