ipv6 neighbor stale-aging
Syntax
ipv6 neighbor stale-aging aging-time
undo ipv6 neighbor stale-aging
View
System view
Default level
2: System level
Parameters
aging-time: Age timer for ND entries in stale state, in the range of 1 to 24 hours.
Description
Use ipv6 neighbor stale-aging to set the age timer for ND entries in stale state.
Use undo ipv6 neighbor stale-aging to restore the default.
By default, the age timer for ND entries in stale state is four hours.
Examples
# Set the age timer for ND entries in stale state to two hours.
<Sysname> system-view [Sysname] ipv6 neighbor stale-aging 2