ipv6 nd hop-limit

Syntax

ipv6 nd hop-limit value

undo ipv6 nd hop-limit

View

System view

Default level

2: System level

Parameters

value: Specifies the number of hops, in the range of 0 to 255. When it is set to 0, the Hop Limit field in RA messages sent by the device is 0. The number of hops is determined by the requesting device itself.

Description

Use ipv6 nd hop-limit to configure the hop limit advertised by the device.

Use undo ipv6 nd hop-limit to restore the default hop limit.

By default, the hop limit advertised by the device is 64.

Examples

# Set the hop limit advertised by the device to 100.

<Sysname> system-view
[Sysname] ipv6 nd hop-limit 100