ipv6 nd autoconfig managed-address-flag

Syntax

ipv6 nd autoconfig managed-address-flag

undo ipv6 nd autoconfig managed-address-flag

View

Interface view

Default level

2: System level

Parameters

None

Description

Use ipv6 nd autoconfig managed-address-flag to set the managed address configuration (M) flag to 1 so that the host can acquire an IPv6 address through stateful autoconfiguration (for example, from a DHCP server).

Use undo ipv6 nd autoconfig managed-address-flag to restore the default.

By default, the M flag is set to 0 so that the host can acquire an IPv6 address through stateless autoconfiguration.

Examples

# Configure the host to acquire an IPv6 address through stateful autoconfiguration.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd autoconfig managed-address-flag