display ipv6 neighbors count

Syntax

display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type interface-number | vlan vlan-id } count [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically and configured statically.

dynamic: Displays the total number of all neighbor entries acquired dynamically.

static: Displays the total number of neighbor entries configured statically.

slot slot-number: Displays the total number of neighbor entries on a specific IRF member switch. The slot-number argument specifies the ID of an IRF member switch. The value range for the argument depends on the number of member switches and their member IDs in the IRF fabric, which you can display with the display irf command. On a standalone device, the slot-number argument specifies the ID of the device.

interface interface-type interface-number: Displays the total number of neighbor entries of a specific interface.

vlan vlan-id: Displays the total number of neighbor entries of a specific VLAN whose ID ranges from 1 to 4094.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display ipv6 neighbors count to display the total number of neighbor entries satisfying the specified condition.

Examples

# Display the total number of neighbor entries acquired dynamically.

<Sysname> display ipv6 neighbors dynamic count
Total dynamic entry(ies):  2