ip host

Syntax

ip host hostname ip-address

undo ip host hostname [ ip-address ]

View

System view

Default level

2: System level

Parameters

hostname: Specifies the host name, consisting of 1 to 255 characters, including case-insensitive letters, numbers, hyphens (-), underscores (_), or dots (.). The host name must include at least one letter.

ip-address: Specifies the IPv4 address of the specified host in dotted decimal notation.

Description

Use ip host to create a host name to IPv4 address mapping in the static resolution table.

Use undo ip host to remove a mapping.

No mappings are created by default.

Each host name can correspond to only one IPv4 address. The IPv4 address you last assign to the host name will overwrite the previous one if there is any.

Related commands: display ip host.

Examples

# Map the IP address 10.110.0.1 to the host name aaa.

<Sysname> system-view
[Sysname] ip host aaa 10.110.0.1