display arp ip-address

Syntax

display arp ip-address [ slot slot-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

ip-address: Displays the ARP entry for the specified IP address.

slot slot-number: Displays the ARP entries on a specific IRF member switch. The slot-number argument specifies the ID of an IRF member switch. The value range for the argument depends on the number of member switches and their member IDs in the IRF fabric, which you can display with the display irf command. On a standalone device, the slot-number argument specifies the ID of the device.

verbose: Displays the detailed information about ARP entries.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see the Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display arp ip-address to display the ARP entry for a specific IP address.

Related commands: arp static and reset arp.

Examples

# Display the corresponding ARP entry for the IP address 20.1.1.1.

<Sysname> display arp 20.1.1.1
                Type: S-Static    D-Dynamic
IP Address       MAC Address     VLAN ID  Interface              Aging Type
20.1.1.1         00e0-fc00-0001  N/A      N/A                    N/A   S