Configuring IPv6 BGP route redistribution

1. Enter system view.

system-view

N/A

2. Enter BGP view.

bgp as-number

N/A

3. Enter IPv6 address family view.

ipv6-family

N/A

4. Enable default route redistribution into the IPv6 BGP routing table.

default-route imported

Optional.

Not enabled by default.

If the default-route imported command is not configured, using the import-route command cannot redistribute any IGP default route.

5. Enable route redistribution from another routing protocol.

import-route protocol [ process-id [ med med-value | route-policy route-policy-name ] * ]

Not enabled by default.