Configuring IPv6 IS-IS basic functions
You can implement IPv6 inter-networking through configuring IPv6 IS-IS in IPv6 network environment.
Before the configuration, complete the following tasks:
Enable IPv6 globally.
Configure IP addresses for interfaces, and ensure all neighboring nodes are reachable.
Enable IS-IS.
To configure the basic functions of IPv6 IS-IS:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable an IS-IS process and enter IS-IS view. | isis [ process-id ] | Not enabled by default. |
3. Configure the network entity title for the IS-IS process. | network-entity net | Not configured by default. |
4. Enable IPv6 for the IS-IS process. | ipv6 enable | Disabled by default. |
5. Return to system view. | quit | N/A |
6. Enter interface view. | interface interface-type interface-number | N/A |
7. Enable IPv6 for an IS-IS process on the interface. | isis ipv6 enable [ process-id ] | Disabled by default. |