Configuring the LSU transmit rate

Sending large numbers of LSU packets affects router performance and consumes too much network bandwidth. You can configure the router to send LSU packets at a proper interval and limit the maximum number of LSU packets sent out of an OSPF interface each time.

To configure the LSU transmit rate:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter OSPF view.	ospf [ process-id \| router-id router-id \| vpn-instance vpn-instance-name ] *	N/A
3. Configure the LSU transmit rate.	transmit-pacing interval interval count count	Optional. By default, an OSPF interface sends up to three LSU packets every 20 milliseconds.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter OSPF view.

ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *

N/A

3. Configure the LSU transmit rate.

transmit-pacing interval interval count count

Optional.

By default, an OSPF interface sends up to three LSU packets every 20 milliseconds.

prev	up	next
Configuring OSPF to give priority to receiving and processing hello packets	home	Setting the DSCP value for OSPF packets