Logging neighbor state changes

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter OSPF view.	ospf [ process-id \| router-id router-id \| vpn-instance vpn-instance-name ] *	N/A
3. Enable the logging of neighbor state changes.	log-peer-change	Optional. Enabled by default.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter OSPF view.

ospf [ process-id | router-id router-id | vpn-instance vpn-instance-name ] *

N/A

3. Enable the logging of neighbor state changes.

log-peer-change

Optional.

Enabled by default.

prev	up	next
Enabling compatibility with RFC 1583	home	Configuring OSPF network management