Adding the interface MTU into DD packets

By default, an interface adds 0 into the interface MTU field of a DD packet to be sent rather than the interface MTU. You can enable an interface to add its MTU into DD packets.

To add the interface MTU into DD packets:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	interface interface-type interface-number	N/A
3. Enable the interface to add its MTU into DD packets.	ospf mtu-enable	Optional. Not enabled by default.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

N/A

3. Enable the interface to add its MTU into DD packets.

ospf mtu-enable

Optional.

Not enabled by default.

prev	up	next
Configuring OSPF authentication	home	Configuring the maximum number of external LSAs in LSDB