Specifying LSA transmission delay

Each LSA in the LSDB has an age that is incremented by 1 every second, but the age does not change during transmission. It is necessary to add a transmission delay into the age time especially for low-speed links.

To specify the LSA transmission delay on an interface:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	interface interface-type interface-number	N/A
3. Specify the LSA transmission delay.	ospf trans-delay seconds	Optional. 1 second by default.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter interface view.

interface interface-type interface-number

N/A

3. Specify the LSA transmission delay.

ospf trans-delay seconds

Optional.

1 second by default.

prev	up	next
Configuring OSPF packet timers	home	Specifying SPF calculation interval