vrrp ipv6 vrid timer advertise

Syntax

vrrp ipv6 vrid virtual-router-id timer advertise adver-interval

undo vrrp ipv6 vrid virtual-router-id timer advertise

View

Interface view

Default level

2: System level

Parameters

virtual-router-id: VRRP group number, which ranges from 1 to 255.

adver-interval: Interval at which the master in the specified VRRP group sends VRRP advertisements. It ranges from 100 to 4095 centiseconds.

Description

Use vrrp ipv6 vrid timer advertise to configure the Adver_Timer of the specified VRRP group.

Use undo vrrp ipv6 vrid timer advertise to restore the default.

By default the Adver_Timer is 100 centiseconds.

The Adver_Timer controls the interval at which the master sends VRRP packets.

Before executing the command, create a VRRP group on an interface and configure the virtual IPv6 address of the VRRP group.

Routers in the same VRRP group must use the same Adver_Timer setting.

Related commands: display vrrp ipv6.

Examples

# Set the master in VRRP group 1 to send VRRP advertisements at intervals of 500 centiseconds.

<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp ipv6 vrid 1 virtual-ip fe80::2 link-local
[Sysname-Vlan-interface2] vrrp ipv6 vrid 1 timer advertise 500