ring enable

Syntax

ring ring-id enable

undo ring ring-id enable

View

RRPP domain view

Default level

2: System level

Parameters

ring-id: RRPP ring ID, which ranges from 1 to 64.

Description

Use ring enable to enable the RRPP ring.

Use undo ring enable to disable the RRPP ring.

By default, the RRPP ring is disabled.

To activate the RRPP domain, enable the RRPP protocol and the RRPP rings for the RRPP domain.

Related commands: rrpp enable.

Examples

# Enable RRPP ring 10 in RRPP domain 1.

<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1] ring 10 node-mode master primary-port ethernet 1/0/1 secondary-port ethernet 1/0/2 level 0
[Sysname-rrpp-domain1] ring 10 enable