oam loopback interface

Syntax

oam loopback interface interface-type interface-number

undo oam loopback interface interface-type interface-number

View

User view, system view

Default level

2: System level (command in system view)

1: Monitor level (command in user view)

Parameters

interface-type interface-number: Specifies a port by its type and number.

Description

Use oam loopback interface to enable Ethernet OAM remote loopback on an Ethernet port.

Use undo oam loopback interface to disable Ethernet OAM remote loopback on an Ethernet port.

By default, Ethernet OAM remote loopback is disabled on an Ethernet port.

Ethernet OAM remote loopback is available only after the Ethernet OAM connection is established and can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode.

Related commands: oam enable, oam loopback, and oam mode.

Examples

# Configure the active Ethernet OAM mode and enable Ethernet OAM on Ethernet 1/0/1, and then enable Ethernet OAM remote loopback on Ethernet 1/0/1 in system view.

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] oam mode active
[Sysname-Ethernet1/0/1] oam enable
[Sysname-Ethernet1/0/1] quit
[Sysname]oam loopback interface ethernet 1/0/1