proposal (IKE peer view)

Syntax

proposal proposal-number&<1-6>

undo proposal [ proposal-number ]

View

IKE peer view

Default level

2: System level

Parameters

proposal-number&<1-6>: Sequence number of the IKE proposal for the IKE peer to reference, in the range 1 to 65535. &<1-6> means that you can specify the proposal-number argument for up to six times. An IKE proposal with a smaller sequence number has a higher priority.

Description

Use the proposal command to specify the IKE proposals for the IKE peer to reference.

Use the undo proposal command to remove one or all IKE proposals referenced by the IKE peer.

By default, an IKE peer references no IKE proposals and, when initiating IKE negotiation, it uses the IKE proposals configured in system view.

In the IKE negotiation phase 1, the local peer uses the IKE proposals specified for it, if any.

An IKE peer can reference up to six IKE proposals.

The responder uses the IKE proposals configured in system view for negotiation.

Related commands: ike proposal and ike peer (system view).

Examples

# Configure IKE peer peer1 to reference IKE proposal 10.

<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] proposal 10