ike local-name

Syntax

ike local-name name

undo ike local-name

View

System view

Default level

2: System level

Parameters

name: Name of the local security gateway for IKE negotiation, a case-sensitive string of 1 to 32 characters.

Description

Use the ike local-name command to configure a name for the local security gateway.

Use the undo ike local-name command to restore the default.

By default, the device name is used as the name of the local security gateway.

If you configure the id-type name or id-type user-fqdn command on the initiator, the IKE negotiation peer uses the security gateway name as its ID to initiate IKE negotiation, and you must configure the ike local-name command in system view or the local-name command in IKE peer view on the local device. If you configure both the ike local-name command and the local-name command, the name configured by the local-name command is used.

The IKE negotiation initiator sends its security gateway name as its ID to the peer, and the peer uses the security gateway name configured with the remote-name command to authenticate the initiator. Make sure the local gateway name matches the remote gateway name configured on the peer.

Related commands: remote-name and id-type.

Examples

# Configure the local security gateway name as app.

<Sysname> system-view
[Sysname] ike local-name app