display ike dpd
Syntax
display ike dpd [ dpd-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
dpd-name: DPD name, a string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ike dpd command to display information about Dead Peer Detection (DPD) detectors.
If you do not specify any parameters, the command displays information about all DPD detectors.
Related commands: ike dpd.
Examples
# Display information about all DPD detectors.
<Sysname> display ike dpd --------------------------- IKE dpd: dpd1 references: 1 interval-time: 10 time_out: 5 ---------------------------
Table 60: Output description
Field | Description |
---|---|
references | Number of IKE peers that use the DPD detector |
Interval-time | DPD query trigging interval in seconds |
time_out | DPD packet retransmission interval in seconds |