arp anti-attack source-mac exclude-mac

Syntax

arp anti-attack source-mac exclude-mac mac-address&<1-10>

undo arp anti-attack source-mac exclude-mac [ mac-address&<1-10> ]

View

System view

Default level

2: System level

Parameters

mac-address&<1-10>: Specifies a MAC address list. The mac-address argument indicates a protected MAC address in the format H-H-H. &<1-10> indicates the number of protected MAC addresses that you can configure.

Description

Use arp anti-attack source-mac exclude-mac to configure protected MAC addresses that are excluded from ARP packet detection.

Use undo arp anti-attack source-mac exclude-mac to remove the configured protected MAC addresses.

By default, no protected MAC address is configured.

If no MAC address is specified in the undo arp anti-attack source-mac exclude-mac command, all the configured protected MAC addresses are removed.

Examples

# Configure a protected MAC address.

<Sysname> system-view
[Sysname] arp anti-attack source-mac exclude-mac 2-2-2