display sftp client source
Syntax
display sftp client source [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display sftp client source to display the source IP address or source interface set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, the system displays the message "Neither source IP address nor source interface was specified for the SFTP client."
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Sysname> display sftp client source The source IP address you specified is 192.168.0.1