habp server vlan

Syntax

habp server vlan vlan-id

undo habp server

View

System view

Default level

2: System level

Parameters

vlan-id: Specifies the ID of the VLAN in which HABP packets are to be transmitted, in the range of 1 to 4094.

Description

Use habp server vlan to configure HABP to operate in server mode and specify the VLAN in which HABP packets are to be transmitted.

Use undo habp server to configure HABP to operate in the default mode.

By default, HABP operates in client mode.

In a cluster, if a member switch with 802.1X authentication or MAC authentication enabled is attached with some other member switches of the cluster, you also need to configure HABP server on this device. Otherwise, the cluster management device will not be able to manage the devices attached to this member switch. For information about the cluster function, see Network Management and Monitoring Configuration Guide.

Examples

# Configure HABP to operate in server mode and specify the VLAN for HABP packets as VLAN 2.

<Sysname> system-view
[Sysname] habp server vlan 2