port-security timer disableport
Syntax
port-security timer disableport time-value
undo port-security timer disableport
View
System view
Default level
2: System level
Parameters
time-value: Specifies the silence period during which the port remains disabled, in seconds. It is in the range of 20 to 300.
Description
Use port-security timer disableport to set the silence period during which the port remains disabled.
Use undo port-security timer disableport to restore the default.
By default, the silence period is 20 seconds.
If you configure the intrusion protection policy as disabling the port temporarily whenever it receives an illegal frame, use this command to set the silence period.
Related commands: display port-security.
Examples
# Configure the intrusion protection policy as disabling the port temporarily whenever it receives an illegal frame and set the silence period to 30 seconds.
<Sysname> system-view [Sysname] port-security timer disableport 30 [Sysname] interface ethernet 1/0/1 [Sysname-Ethernet1/0/1] port-security intrusion-mode disableport-temporarily