dot1x eapol untag

Syntax

dot1x eapol untag

undo dot1x eapol untag

View

Layer 2 Ethernet interface view

Default level

3: Manage level

Description

Use dot1x eapol untag to configure a port to send EAPOL packets untagged.

By default, whether the port sends EAPOL packets with a VLAN tag depends on the port configuration and VLAN assignment.

EAPOL frames exchanged between the 802.1X client and the network access device must not contain VLAN tags. If any 802.1X user attached to a port is assigned a tagged VLAN, you must enable the port to send EAPOL frames untagged.

Examples

# Configure port Ethernet 1/0/1 to send EAPOL packets untagged.

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] dot1x eapol untag