stop-accounting-buffer enable (HWTACACS scheme view)

Syntax

stop-accounting-buffer enable

undo stop-accounting-buffer enable

View

HWTACACS scheme view

Default level

2: System level

Parameters

None

Description

Use stop-accounting-buffer enable to enable the switch to buffer stop-accounting requests to which no responses are received.

Use undo stop-accounting-buffer enable to disable the buffering function.

By default, the switch buffers stop-accounting requests to which no responses are received.

Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every stop-accounting request to the HWTACACS accounting servers. For each stop-accounting request getting no response in the specified period of time, the NAS buffers and resends the packet until it receives a response or the number of transmission attempts reaches the configured limit. In the latter case, the NAS discards the packet.

Related commands: reset stop-accounting-buffer and display stop-accounting-buffer.

Examples

# In HWTACACS scheme hwt1, enable the switch to buffer the stop-accounting requests getting no responses.

<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable