primary accounting (HWTACACS scheme view)

Syntax

primary accounting ip-address [ port-number | key [ cipher | simple ] key ] *

undo primary accounting

View

HWTACACS scheme view

Default level

2: System level

Parameters

ip-address: IP address of the primary HWTACACS accounting server, in dotted decimal notation. The default setting is 0.0.0.0.

port-number: Service port number of the primary HWTACACS accounting server. It ranges from 1 to 65535 and defaults to 49.

key { cipher | simple } key: Sets the shared key for secure communication with the primary HWTACACS accounting server.

Description

Use primary accounting to specify the primary HWTACACS accounting server.

Use undo primary accounting to remove the configuration.

By default, no primary HWTACACS accounting server is specified.

The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the configuration fails.

If you configure the command repeatedly, only the last configuration takes effect.

You can remove an accounting server only when it is not used by any active TCP connection to send accounting packets. Removing an accounting server affects only accounting processes that occur after the remove operation.

Related commands: display hwtacacs.

Examples

# Specify the IP address and port number of the primary accounting server for HWTACACS scheme test1 as 10.163.155.12 and 49.

<Sysname> system-view
[Sysname] hwtacacs scheme test1
[Sysname-hwtacacs-test1] primary accounting 10.163.155.12 49