timer response-timeout (RADIUS scheme view)

Syntax

timer response-timeout seconds

undo timer response-timeout

View

RADIUS scheme view

Default level

2: System level

Parameters

seconds: RADIUS server response timeout period in seconds, in the range of 1 to 10.

Description

Use timer response-timeout to set the RADIUS server response timeout timer.

Use undo timer response-timeout to restore the default.

By default, the RADIUS server response timeout period is 3 seconds.

If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS request (authentication/authorization or accounting request), it resends the request so that the user has more opportunity to obtain the RADIUS service. The NAS uses the RADIUS server response timeout timer to control the transmission interval.

The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server response timeout period cannot be greater than 75.

Related commands: retry.

Examples

# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.

<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5