stop-accounting-buffer enable (RADIUS scheme view)

Syntax

stop-accounting-buffer enable

undo stop-accounting-buffer enable

View

RADIUS scheme view

Default level

2: System level

Parameters

None

Description

Use stop-accounting-buffer enable to enable the switch to buffer stop-accounting requests to which no responses are received.

Use undo stop-accounting-buffer enable to disable the buffering function.

By default, the switch buffers stop-accounting requests to which no responses are received.

Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every stop-accounting request to the RADIUS accounting servers. For each stop-accounting request getting no response in the specified period of time, the NAS buffers and resends the packet until it receives a response or the number of transmission attempts reaches the configured limit. In the latter case, the NAS discards the packet. However, if you have removed the accounting server, stop-accounting messages are not buffered.

Related commands: reset stop-accounting-buffer and display stop-accounting-buffer.

Examples

# Enable the switch to buffer the stop-accounting requests to which no responses are received.

<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable