state (local user view)

Syntax

state { active | block }

undo state

View

Local user view

Default level

2: System level

Parameters

active: Places the local user in active state to allow the local user to request network services.

block: Places the local user in blocked state to prevent the local user from requesting network services.

Description

Use state to set the status of a local user.

Use undo state to restore the default.

By default, a local user is in active state.

By blocking a user, you disable the user from requesting network services. No other users are affected.

Related commands: local-user.

Examples

# Place local user user1 to the blocked state.

<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] state block