display local-user

Syntax

display local-user [ idle-cut { disable | enable } | service-type { ftp | lan-access | portal | ssh | telnet | terminal | web } | state { active | block } | user-name user-name | vlan vlan-id ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled.

service-type: Specifies the local users who use a specific type of service.

state { active | block }: Specifies local users in the state of active or blocked. A local user in active state can access network services, but a local user in blocked state cannot.

user-name user-name: Specifies all local users using the specified username. The username is a case-sensitive string of 1 to 55 characters and does not contain the domain name.

vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to 4094.

slot slot-number: Specifies the local users on the switch by its device ID. The slot-number argument represents the device ID, which must be 1.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display local-user to display configuration and statistics information about local users.

If you do not specify any parameter, the command displays information about all local users.

Related commands: local-user.

Examples

# Display information about all local users.

<Sysname> display local-user
The contents of local user abc:
 State:                    Active
 ServiceType:              lan-access
 Access-limit:             Enabled           Current AccessNum: 0
 Max AccessNum:            300
 User-group:               system
 Bind attributes:
  IP address:              1.2.3.4
  Bind location:           1/4/1 (SLOT/SUBSLOT/PORT)
  MAC address:             0001-0002-0003
  Vlan ID:                 100
 Authorization attributes:
  Idle TimeOut:            10(min)
  Work Directory:          flash:/
  User Privilege:          3
  Acl ID:                  2000
  Vlan ID:                 100
  User Profile:            prof1
 Expiration date:          12:12:12-2018/09/16
 Password aging:           Enabled (30 days)
 Password length:          Enabled (4 characters)
 Password composition:     Enabled (4 types,  2 characters per type)
Total 1 local user(s) matched.

Table 3: Command output

Field

Description

State

Status of the local user: active or blocked.

ServiceType

Service types that the local user can use, including FTP, LAN, portal, SSH, Telnet, terminal, and web.

Access-limit

Whether or not to limit the number of concurrent connections of the username.

Current AccessNum

Number of connections that currently use the username.

Max AccessNum

Maximum number of concurrent connections of the username.

Bind attributes

Binding attributes of the local user.

VLAN ID

VLAN to which the user is bound.

Authorization attributes

Authorization attributes of the local user.

Idle TimeOut

Idle timeout period of the user, in minutes.

Work Directory

Directory that the FTP user can access.

VLAN ID

Authorized VLAN of the local user.

User Profile

User profile for local user authorization.

Expiration date

Expiration time of the local user.

Password aging

Aging time of the local user password.

Password length

Minimum length of the local user password.

Password composition

Password composition policy of the local user.