authorization default
Syntax
authorization default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme radius-scheme-name [ local ] }
undo authorization default
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to 32 characters.
local: Performs local authorization.
none: Does not perform any authorization exchange. After passing authentication, non-login users can access the network, FTP users can access the root directory of the switch, and other login users can access only the commands of Level 0.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32 characters.
Description
Use authorization default to configure the default authorization method for an ISP domain.
Use undo authorization default to restore the default.
By default, the default authorization method for the ISP domain of an ISP domain is local.
The specified RADIUS or HWTACACS scheme must have been configured.
The default authorization method is used for all users who support the specified authorization method and have no specific authorization method are configured.
The RADIUS authorization configuration takes effect only when the authentication method and authorization method of the ISP domain use the same RADIUS scheme.
Related commands: local-user, hwtacacs scheme, and radius scheme.
Examples
# Configure the default authorization method for ISP domain test to use RADIUS authorization scheme rd and use local authorization as the backup.
<Sysname> system-view [Sysname] domain test [Sysname-isp-test] authorization default radius-scheme rd local