authentication portal

	NOTE: This command is available only on the HPE 3100 v2 EI switches.

Syntax

authentication portal { local | none | radius-scheme radius-scheme-name [ local ] }

undo authentication portal

View

ISP domain view

Default level

2: System level

Parameters

local: Performs local authentication.

none: Does not perform any authentication.

radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32 characters.

Description

Use authentication portal to configure the authentication method for portal users.

Use undo authentication portal to restore the default.

By default, the default authentication method for the ISP domain is used for portal users.

The specified RADIUS scheme must have been configured.

Related commands: local-user, authentication default, and radius scheme.

Examples

# Configure ISP domain test to use local authentication for portal users.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal local

# Configure ISP domain test to use RADIUS scheme rd for authentication of portal users and use local authentication as the backup.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal radius-scheme rd local