accounting portal

	NOTE: This command is available only on the HPE 3100 v2 EI switches.

Syntax

accounting portal { local | none | radius-scheme radius-scheme-name [ local ] }

undo accounting portal

View

ISP domain view

Default level

2: System level

Parameters

local: Performs local accounting.

none: Does not perform any accounting.

radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32 characters.

Description

Use accounting portal to configure the accounting method for portal users.

Use undo accounting portal to restore the default.

By default, the default accounting method for the ISP domain is used for portal users.

The specified RADIUS scheme must have been configured.

Related commands: local-user, accounting default, and radius scheme.

Examples

# Configure ISP domain test to use local accounting for portal users.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal local

# Configure ISP domain test to use RADIUS scheme rd for accounting on portal users and use local accounting as the backup.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal radius-scheme rd local