Verifying the configuration
After the switch reboots, enter the username (test) and password (AAbbcc1234%). The system prompts that your first login is successful, and asks you to enter a new password. Enter a new password which has at least four characters different than the previous one and confirm the password. Then, the system displays the <Sysname> prompt.
User interface aux0 is available. Please press ENTER. Login authentication Username:test Password: Info: First logged in. For security reasons you will need to change your password. Please enter your new password. Password:********** Confirm :********** Updating user(s) information, please wait........... <Sysname>
# Display the current FIPS mode. You can see that the FIPS mode is enabled.
<Sysname> display fips status FIPS mode is enabled