Configuration procedure
To configure ND detection:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter VLAN view. | vlan vlan-id | N/A |
3. Enable ND Detection. | ipv6 nd detection enable | Disabled by default. |
4. Quit system view. | quit | N/A |
5. Enter Layer 2 Ethernet interface view or Layer 2 aggregate interface view. | interface interface-type interface-number | N/A |
6. Configure the port as an ND-trusted port. | ipv6 nd detection trust | Optional. A port does not trust sources of ND packets by default. |