Configuring a name for the local security gateway
If the IKE negotiation peer uses the security gateway name as its ID to initiate IKE negotiation (the id-type name or id-type user-fqdn command is configured on the initiator), configure the ike local-name command in system view or the local-name command in IKE peer view on the local device. If you configure both commands, the name configured in IKE peer view is used.
To configure a name for the local security gateway:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure a name for the local security gateway. | ike local-name name | Optional. By default, the device name is used as the name of the local security gateway. |