Setting the maximum number of concurrent 802.1X users on a port

You can set the maximum number of concurrent 802.1X users for ports individually in Ethernet interface view or in bulk in system view. If different settings are configured for a port in both views, the setting configured later takes effect.

To set the maximum number of concurrent 802.1X users on a port:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Set the maximum number of concurrent 802.1X users on a port.	In system view:dot1x max-user user-number [ interface interface-list ] In Ethernet interface view: interface interface-type interface-number dot1x max-user user-number [ interface interface-list ]	Optional. Use either method. The default maximum number of concurrent 802.1X users on a port is 2048.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Set the maximum number of concurrent 802.1X users on a port.

In system view:dot1x max-user user-number [ interface interface-list ]
In Ethernet interface view:
1. interface interface-type interface-number
2. dot1x max-user user-number [ interface interface-list ]

Optional.

Use either method.

The default maximum number of concurrent 802.1X users on a port is 2048.

prev	up	next
Specifying an access control method	home	Setting the maximum number of authentication request attempts