Configuration procedure

To enable 802.1X on a port:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enable 802.1X globally.	dot1x	By default, 802.1X is disabled globally.
3. Enable 802.1X on a port.	In system view: dot1x interface interface-list In Ethernet interface view: interface interface-type interface-number dot1x	Use either method. By default, 802.1X is disabled on a port.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enable 802.1X globally.

dot1x

By default, 802.1X is disabled globally.

3. Enable 802.1X on a port.

In system view:
dot1x interface interface-list
In Ethernet interface view:
1. interface interface-type interface-number
2. dot1x

Use either method.

By default, 802.1X is disabled on a port.

prev	up	next
Configuration guidelines	home	Enabling EAP relay or EAP termination