802.1X configuration task list

Task	Remarks
Enabling 802.1X	Required
Enabling EAP relay or EAP termination	Optional
Setting the port authorization state	Optional
Specifying an access control method	Optional
Setting the maximum number of concurrent 802.1X users on a port	Optional
Setting the maximum number of authentication request attempts	Optional
Setting the 802.1X authentication timeout timers	Optional
Configuring the online user handshake function	Optional
Configuring the authentication trigger function	Optional
Specifying a mandatory authentication domain on a port	Optional
Configuring the quiet timer	Optional
Enabling the periodic online user re-authentication function	Optional
Configuring a port to send EAPOL frames untagged	Optional
Setting the maximum number of 802.1X authentication attempts for MAC authentication users	Optional
Configuring a VLAN group	Optional
Configuring an 802.1X guest VLAN	Optional
Configuring an 802.1X Auth-Fail VLAN	Optional
Configuring an 802.1X critical VLAN	Optional
Sending EAP-Success packets to 802.1X users in the critical VLAN	Optional
Configuring an 802.1X voice VLAN	Optional
Specifying supported domain name delimiters	Optional
Configuring 802.1X MAC address binding	Optional

prev	up	next
Configuration prerequisites	home	Enabling 802.1X