Specifying a RADIUS client

This task is to specify the IP address of a client to be managed by the RADIUS server and configure the shared key. The RADIUS server processes only the RADIUS packets sent from the specified clients.

To specify a RADIUS client

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Specify a RADIUS client.

radius-server client-ip ip-address [ key [ cipher | simple ] string ]

No RADIUS client is specified by default.


[NOTE: ]

NOTE:

  • The IP address of a RADIUS client specified on the RADIUS server must be consistent with the source IP address of outgoing RADIUS packets configured on the RADIUS client.

  • The shared key configured on the RADIUS server must be consistent with that configured on the RADIUS client.