arp rate-limit information

Syntax

arp rate-limit information interval seconds

undo arp rate-limit information

View

System view

Default level

2: System level

Parameters

interval seconds: Specifies the interval for sending trap and log messages when ARP packet rate exceeds the threshold rate. The seconds argument ranges from 1 to 86400, in seconds.

Description

Use arp rate-limit information to set the interval for sending trap and log messages when ARP packet rate exceeds the threshold rate.

Use undo arp rate-limit information to restore the default.

By default, the interval is 60 seconds.

This command must work in cooperation with the arp rate-limit command.

Examples

# Configure the device to send trap and log messages every 120 seconds when ARP packet rate exceeds the threshold rate.

<Sysname> system-view
[Sysname] arp rate-limit information interval 120