ipv6 verify source max-entries

Syntax

ipv6 verify source max-entries number

undo ipv6 verify source max-entries

View

Layer 2 Ethernet interface view

Default level

2: System level

Parameters

number: Maximum number of IPv6 source guard binding entries allowed on a port. The value is in the range of 0 to 2048.

Description

Use ipv6 verify source max-entries to set the maximum number of static and dynamic IPv6 source guard binding entries on a port. When the number of IPv6 binding entries on a port reaches the maximum, the port does not allowed new IPv6 binding entries any more.

Use undo ipv6 verify source max-entries to cancel the limit set on the number of IPv6 source guard binding entries.

By default, the maximum number of IPv6 source guard binding entries allowed on a port is 2048.

If the maximum number of IPv6 binding entries to be configured is smaller than the number of existing IPv6 binding entries on the port, the maximum number can be configured successfully and the existing entries are not affected. New IPv6 binding entries, however, cannot be added any more unless the number of IPv6 binding entries on the port drops below the configured maximum.

Examples

# Set the maximum number of IPv6 source guard binding entries to 100 on port Ethernet 1/0/1.

<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] ipv6 verify source max-entries 100