display ike dpd

Syntax

display ike dpd [ dpd-name ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

dpd-name: DPD name, a string of 1 to 32 characters.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use the display ike dpd command to display information about Dead Peer Detection (DPD) detectors.

If you do not specify any parameters, the command displays information about all DPD detectors.

Related commands: ike dpd.

Examples

# Display information about all DPD detectors.

<Sysname> display ike dpd

---------------------------
 IKE dpd: dpd1
   references: 1
   interval-time: 10
   time_out: 5
---------------------------